At 18’2” in length and with a 70″ beam, the Mosquito is a very capable hull for many situations – however it’s designed to do one thing with absolute perfection: silently stalk inshore game fish in the shallowest coastal waters. And we’re convinced this skiff will do that better than any other skiff on the market.
CONSTRUCTION & FEATURES
Engine and Rigging
- Equipped with a white Suzuki 60 HP engine and stainless-steel prop
- Fully rigged with hydraulic steering helm and throttle control
Fuel System
- 15-gallon EPA compliant fuel tank, easily serviced through forward hatch
- Fuel / water separator
Storage / Maintenance Access
- Rod rack w/ full under-gunnel Sea Dek and fly rod tubes which hold up to eight rods
- Large forward storage compartment and two large aft storage compartments
- Bilge access hatch
- Dry gutters on all hatches with Sea Dek on underside of aft and forward hatches
Hull and Topside Deck
- Vacuum infused hull and 100% composite construction materials
- Custom color hull – Kiwi Squeeze
- Custom color topside deck – Kiwi Light
Seating
- Snow white pleated vinyl with snow white trim and piping
- Backrest, folding aft on poling platform with drop-down legs
Instrumentation / Electronics
- Gaugeless setup (data direct to electronics)
- Simrad NSX3009 (9” display) with Active Imaging 3-in-1 transducer
Cockpit and Console
- Tilt steering
- Rope wrapped steering wheel with power knob
- JL audio package with two white speakers
- Charger, dual 12-volt/USB
- Cup holders (2), flush mounted in top of console
- Handrails (2), stainless steel mounted on console
- Rod holders, 2-place aluminum, mounted on both sides of the console
Livewell
- 18-gallon, fully insulated, livewell plumbed under the forward console jump seat
- Mr. Bubbles bubbler
- Controllable directional aerator and overflow drain with removable cover
Lighting
- Poling platform white LED light
- Cockpit under-gunnel green LED lighting
Poling & Casting
- Welded anodized aluminum frame
- Rod holders (2) welded on poling platform in the trolling position
- Casting platform with one rod holder port side, aft
SeaDek
- Poling and casting platforms, Camel over Mocha
- Full under-gunnel protector pads, Camel over Mocha
Deck & Hull
- Rub rail, white, with polished stainless-steel inserts
- One bow eye and two stern eyes
- One recessed bow cleat
- Accon recessed push pole holders located on the bow and midship
- Lenco trim tabs with LED indicator switch
- Atlas 4” setback jack plate
- Power Pole, 6 ft. Pro Series II, white
Trolling Motor
- Minn Kota Terrova iPilot trolling motor, 55 lb., 12-volt
- Pre-rigged for trolling motor, including two deep cycle batteries, 60-amp breaker, charging
system, removable mount and plug & receptacle
Trailer
- Ramlin custom fitted aluminum dry launch trailer
- Swing tongue for shortest possible length
- Spare wheel, hub and mount